Service Manual For Dresser Td8
Optimised productivity, ease of operation, superior balance and stability on wet or soft ground….
The reason I need a service manual is obviously to find and repair the hydraulic leaks under the tranny but also because the tranny oil level got low enough that the main track brake pedal lost functionality. The right side track brake also stopped working but will engage when the machine is on an incline. Download: Dresser td8 manual Read Online: Dresser td8 manual have a Dresser TD8. Was told it was an 88, but noticed the repair manual that came with it is for an 81. The old guy that sold it to us went through several of them. Dont know if he got confused, or more likely, never bothered to buy the new manual since these things don't change that much from year to year. Haven't checked the vin.
The new DRESSTA ‘S Series’ hydrostatic compact crawler dozers – the TD-8S LGP is equipped with Rexroth dual path hydrostatic drive systems that transmit full power to both tracks in all conditions to ensure smooth speed changes, pivot turns and counter rotation – improving on site manoeuvrability even when working on confined jobsites. All these features combine to ensure optimised productivity and ease of operation.
The Cummins 3.8 litre Quantum series engine combines proven electronic controls and is equipped with a DEF after-treatment. With impressive performance and extended service intervals, owning and operating costs are fully optimized.
The Series dozers are Engineered to optimize versatility, controllability and finish grade accuracy & are ease to transport.
| Engine Manufacturer / Model / Tier | Cummins/QSF 3.8/T4F |
|---|---|
| Displacement | 3.8 l231.9 in3 |
| Rated Speed | 2600 RPM |
| Engine Output - Net | 70 kW94 hp |
| Rated Speed - Torque | 1400 RPM |
| Engine Torque | 414 Nm305.4 lb/ft |
| Transmission Type - Fwd Rev Speeds | Hydrostatic- 10/10 |
| Carrier Rollers / Track Rollers | 1/7 |
| Shoe Pitch | 165 mm6.5 in |
| Track Shoe Width | 660 mm26.0 in |
| Ground Contact Area | 30795 cm24,773.2 in2 |
| Number of Shoes | 40 |
| Fuel Tank | 185 l48.9 Gal(US) |
|---|---|
| Hydraulic Tank | 100 l26.4 Gal(US) |
| Blade Capacity | 2 m32.6 yd3 |
| Height Top of ROPS (Max) | 2800 mm110.2 in |
|---|---|
| Width - Over Tracks | 2385 mm93.9 in |
| Track Length - On Ground | 2333 mm91.9 in |
| Blade Width | 2974 mm117.1 in |
| Speed Forward - Maximum | 10 km/h6.2 MPH |
|---|---|
| Speed Reverse - Maximum | 10 km/h6.2 MPH |
| Ground Bearing Pressure | 33 kPa4.8 psi |
| Drawbar Pull Maximum | 168 kN37.8 lbf |
| Implement Pump Flow | 80 l/min2.8 cfm |
| Operating Weight | 10300 kg22,707.6 lb |
|---|
WORKING EQUIPMENT
Blades
The models are equipped with 6-way (PAT) blades designed for ultimate performance in both heavy-duty & final grade applications; TD-8S LGP with a 2.00 m³ (LGP) blade capacity. Due to operation proven shape and capacity Straight Blade designs perform well when pushing heavier materials in soft and swampy areas.
| BLADE SELECTION | STRAIGHT |
| UNDERCARRIAGE | LGP |
| BLADE CAPACITY SAE J1265 | 2.0 m3 (2.6 yd3) |
Service Manual For Dresser Td8e Dozer
Rippers
Multi-shank (5/3) parallelogram rippers enable the compact crawler dozers to achieve the ripping performance of much larger models – 378mm for the TD-8S.
ENGINE
The TD-8S LGP is powered by a diesel engine that delivers outstanding power & torque;
- Cummins QSF 3.8 litre Tier 4 Final/EU Stage IV Diesel Engine
- Direct injection, in-line, 4 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 73kW (98hp) at rated engine speed of 2200rpm
HYDRAULICS
A proven design tandem pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.
CAB - OPERATOR STATION & CONTROLS
Cocopa external cd drive driver. The TD-8S LGP has been designed to ensure the operator can maximize productivity. For optimal visibility, enlarged side door windows and a sloped engine hood allows for a better view of the blade front and corners. Tinted glazing reduces glare, and the machines feature a sun visor, and both an inside rear view mirror and external side mirrors to provide all round visibility of the machine. An all new cab is designed to provide 30% more space, and FOPS and 2-post ROPS ensure maximum safety.
Numerous features within the dozers mean the operator is able to perform efficiently and effectively. A new high resolution 16” LCD display screen provides real-time system values for temperatures, pressures and forward/reverse direction shift & ground-speed ranges.
Two ergonomic joysticks ensure smooth controllability: a left-hand joystick with control buttons and switches for steering, and a right-hand joystick for mounted equipment. An eco-mode feature, enhances fuel efficiency without sacrificing productivity. S-Series dozers are available with integrated technology options such as Trimble Ready base and full Trimble 3D control systems.
All these features combine to make the hydrostatic TD-8S LGP compact crawler dozers the optimal choice for a wide range of end users and applications. S-Series dozers are engineered to optimize versatility, controllability, and finish grade accuracy.
ROBUST FRAME AND UNDERCARIAGE
Undercarriages feature a standard lubricated track system (LTS) and split link track chains to reduce installation and removal times. All models feature pivot shaft installed suspension for final drive protection and hydraulic track adjusters for extending track chain life.
ENGINEERED FOR YOUR BUSINESS
Compact in Size, Big on Performance
The new DRESSTA ‘S Series’ hydrostatic compact crawler dozers – the TD-8S LT is equipped with Rexroth dual path hydrostatic drive systems that transmit full power to both tracks in all conditions to ensure smooth speed changes, pivot turns and counter rotation – improving on site manoeuvrability even when working on confined jobsites. All these features combine to ensure optimised productivity and ease of operation.
The Cummins 3.8 litre Quantum Series engine combines proven electronic controls and is equipped with a DEF after-treatment. With impressive performance and extended service intervals, owning and operating costs are fully optimized.
The Series dozers are Engineered to optimize versatility, controllability and finish grade accuracy & are ease to transport.
Driveline| Engine Manufacturer / Model / Tier | Cummins/QSF 3.8/T4F |
|---|---|
| Displacement | 3.8 l231.9 in3 |
| Rated Speed | 2200 RPM |
| Engine Output - Net | 70 kW94 hp |
| Rated Speed - Torque | 1600 RPM |
| Engine Torque | 414 Nm305.4 lb/ft |
| Transmission Type - Fwd Rev Speeds | Hydrostatic - 10.5 / 10.5 |
| Carrier Rollers / Track Rollers | 1/7 |
| Shoe Pitch | 165 mm6.5 in |
| Track Shoe Width | 406 mm16.0 in |
| Ground Contact Area | 18943 cm22,936.2 in2 |
| Number of Shoes | 40 |
| Fuel Tank | 185 l48.9 Gal(US) |
|---|---|
| Hydraulic Tank | 100 l26.4 Gal(US) |
| Blade Capacity | 1.84 m32.4 yd3 |
| Height Top of ROPS (Max) | 2800 mm110.2 in |
|---|---|
| Width - Over Tracks | 1981 mm78.0 in |
| Track Length - On Ground | 2333 mm91.9 in |
| Blade Width | 2733 mm107.6 in |
| Speed Forward - Maximum | 10.5 km/h6.5 MPH |
|---|---|
| Speed Reverse - Maximum | 10.5 km/h6.5 MPH |
| Ground Bearing Pressure | 51 kPa7.4 psi |
| Drawbar Pull Maximum | 168 kN37.8 lbf |
| Implement Pump Flow | 80 l/min2.8 cfm |
| Operating Weight | 10000 kg22,046.2 lb |
|---|
WORKING EQUIPMENT
Blades
The models are equipped with 6-way (PAT) blades designed for ultimate performance in both heavy-duty & final grade applications; TD-8S with a 1.84m³ (LT) blade capacity. Due to operation proven shape and capacity Straight Blade designs perform well when pushing heavier materials in soft and swampy areas.
| BLADE SELECTION | STRAIGHT |
| UNDERCARRIAGE | LT |
| BLADE CAPACITY SAE J1265 | 1.84 m³ (2.4 yd3) |
Rippers
Multi-shank (5/3) parallelogram rippers enable the compact crawler dozers to achieve the ripping performance of much larger models – 378mm for the TD-8S.
ENGINE
The TD-8S LT is powered by a diesel engine that delivers outstanding power & torque;
- Cummins QSF 3.8 litre Tier 4 Final/EU Stage IV Diesel Engine
- Direct injection, in-line, 4 cylinder, 4 stroke, turbocharged & Charge Air Cooled (CAC) engine developing 73kW (98hp) at rated engine speed of 2200rpm
HYDRAULICS
A proven design tandem pump system & high capacity hydraulic reservoir for improved cooling. Hose & tube routings are accessible and yet well protected to prevent accidental damage. Trimble ready option is available on factory build orders.
Service Manual For Dresser Td8 Model
CAB - OPERATOR STATION & CONTROLS
The TD-8S has been designed to ensure the operator can maximize productivity. For optimal visibility, enlarged side door windows and a sloped engine hood allows for a better view of the blade front and corners. Tinted glazing reduces glare, and the machines feature a sun visor, and both an inside rear view mirror and external side mirrors to provide all round visibility of the machine. An all new cab is designed to provide 30% more space, and FOPS and 2-post ROPS ensure maximum safety.
Numerous features within the dozers mean the operator is able to perform efficiently and effectively. A new high resolution 16” LCD display screen provides real-time system values for temperatures, pressures and forward/reverse direction shift & ground-speed ranges.
Service Manual For Dresser Td8 Door
Two ergonomic joysticks ensure smooth controllability: a left-hand joystick with control buttons and switches for steering, and a right-hand joystick for mounted equipment. An eco-mode feature, enhances fuel efficiency without sacrificing productivity. S-Series dozers are available with integrated technology options such as Trimble Ready base and full Trimble 3D control systems.
All these features combine to make the hydrostatic TD-8S LT compact crawler dozers the optimal choice for a wide range of end users and applications. S-Series dozers are engineered to optimize versatility, controllability, and finish grade accuracy.
ROBUST FRAME AND UNDERCARIAGE
Undercarriages feature a standard lubricated track system (LTS) and split link track chains to reduce installation and removal times. All models feature pivot shaft installed suspension for final drive protection and hydraulic track adjusters for extending track chain life.
ENGINEERED FOR YOUR BUSINESS